JakeVis

JakeVis

Jack of all, master of none

VLAN Interface on Windows Server

Every needed to add a seondary interface on a Windows server? This will allow you to do it. Make sure you have hyper-v installed - and then add the interfaces. This will add an interface with tagged VLAN 1, called ClientNet.

Add-VMNetworkAdapter -ManagementOS -Name ClientNet
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName ClientNet -Access -VlanId 1

If you need to stop your machine from registering this IP in DNS (with AD), machine sure you open up the adaptor, got to TCP/IP settings, advanced, DNS and uncheck the register with DNS.

You May Also Enjoy

Deploying Microk8s on WSL2

I am running Windows 11, and have enabled WSL2 with Ubuntu via the standard GUI methods (install Ubuntu from the Microsoft Store). However, all credit goes t...

GL.Inet APN Change

I use a GL-X750 for internet access while I travel, and recently wanted to try out verizon to see if they have better coverage, and I wanted to do it without...

NoBo Murphy Bed Modification

In the 2020 No boundaries 19.6 model (and in other models), NoBo does a vertical murphy bed at the end of the trailer. This has the very unfortunate downside...